Instagram Story Save

Clean SWEEP !!! @sonuvabeastcleaned house 🔥🔥🔥 won all 3 events @thegoodeveningranch the past 2 weeks !!! @crazy_cruiser_motorsportsKing of the ranch trailbreaker event. Cripple creek challenge and @werockliveunlimited class. Unbelievable driving. So proud of him.Sealed the national championship for the unlimited class four events in 4–0 undefeated!!! I don’t know if anyone has ever won the first four events in unlimited ever !!! Next up Indiana!! @sasquatchmotorsportsusa @hulse_engineering @area.bfe @ucfab @jmriggingsupply @battlebornwheels

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

Couldn’t be more proud of @sonuvabeast another big win on the east coast!@sonuvabeast and @beastbuggy54 father some team that is unstoppable!

Congrats boys! 👊🏽

Couldn’t be more proud of @sonuvabeast another big win on the east coast!@sonuvabeast and @beastbuggy54 father some team that is unstoppable!

Congrats boys! 👊🏽

WOW !!!! What an amazing event!! Got to give a huge shout out to@crazy_cruiser_motorsportsfor putting on an awesome event! @sonuvabeast absolutely dominated from start to finish! It is amazing to sit back and watch him drive .Now he has 2 guaranteed spots in @trail.hero this year and 2 guaranteed spots in @texastopgunshootoutafter winning this @crazy_cruiser_motorsports event ! Maybe I can talk him into giving me one😂😂😂. Want to give a huge shout out too @hulse_engineering @area.bfe @battlebornwheels @ucfab @sasquatchmotorsportsusa @benthehanksfor all there support!! @sonuvabeast is on 🔥🔥🔥

🔥🔥🔥 Can’t wait for these!! @hulse_engineering @sasquatchmotorsportsusa @sonuvabeast

Can’t wait!! 7 days away! @crazy_cruiser_motorsportscrawl fest @thegoodeveningranch This place is awesome🔥🔥🔥@sonuvabeast and myself can’t wait to get on some east coast rocks!!

Can’t wait!! 7 days away! @crazy_cruiser_motorsportscrawl fest @thegoodeveningranch This place is awesome🔥🔥🔥@sonuvabeast and myself can’t wait to get on some east coast rocks!!

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

@battlebornwheels wheels showing @sonuvabeast some love with his new customized wheels for his new @hulse_engineering @sasquatchmotorsportsusa car coming soon. Theses wheels are being ran on both Brett’s current @hulse_engineering car and my currant @sasquatchmotorsportsusa / @the_gspec car. They are hands-down, the toughest wheels we have ran and have not yet had one throw an inner bead due to there inner locking channel design. And we run lowpressure!

@battlebornwheels wheels showing @sonuvabeast some love with his new customized wheels for his new @hulse_engineering @sasquatchmotorsportsusa car coming soon. Theses wheels are being ran on both Brett’s current @hulse_engineering car and my currant @sasquatchmotorsportsusa / @the_gspec car. They are hands-down, the toughest wheels we have ran and have not yet had one throw an inner bead due to there inner locking channel design. And we run lowpressure!

@battlebornwheels wheels showing @sonuvabeast some love with his new customized wheels for his new @hulse_engineering @sasquatchmotorsportsusa car coming soon. Theses wheels are being ran on both Brett’s current @hulse_engineering car and my currant @sasquatchmotorsportsusa / @the_gspec car. They are hands-down, the toughest wheels we have ran and have not yet had one throw an inner bead due to there inner locking channel design. And we run lowpressure!

1st place unlimited Cedaer City @werocklive !! @sonuvabeast is on🔥🔥🔥 huge thank you to @area.bfe @battlebornwheels @hulse_engineering @sasquatchmotorsportsusa @ucfab @benthehanks for all there support! Up Next West Virginia baby!!! @crazy_cruiser_motorsports crawl fest. And @werocklive @thegoodeveningranchIt is going to be an epic 2 weeks.

1st place unlimited Cedaer City @werocklive !! @sonuvabeast is on🔥🔥🔥 huge thank you to @area.bfe @battlebornwheels @hulse_engineering @sasquatchmotorsportsusa @ucfab @benthehanks for all there support! Up Next West Virginia baby!!! @crazy_cruiser_motorsports crawl fest. And @werocklive @thegoodeveningranchIt is going to be an epic 2 weeks.

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

Introducing the @sonuvabeast edition @hulse_engineeringsingle seat comp buggy replica chassis.

Last year we sponsored @sonuvabeast in his Kalif car and we wanted to keep that going this year with his new Hulse Engineering car.Back in November I reached out to @richard_hulse to see if it was possible to get the actual chassis drawings to scale down and make these as accurate as possible.He has been awesome to work with and got me the drawings right away.

*little side note.When making rc replicas it is a huge help to work with the actual builders of the full-size cars and not just take their designs without permission.I am so very thankful to @jesse_haines_fabrication@kalifredden
and @richard_hulsefor trusting me with their designs and drawings.Hopefully we can work with more builders in the future to bring you the most accurate chassis possible.

Chassis specs
.035 wall DOM tube main chassis.

Subframe excepts Capra or VFD skid plates

2.2 chassis setup for 13.5” wheelbase and cut n shut tires.

Shock setup is @priceyscustomcrawlers 110mm with angled rod ends front and rear.If you use standard lower rod ends you will need 100mm to maintain recommended ride height.

Deposits are live on the website.Pricing and other info available in description on website.
Ultracustomfab.com
#handmadeintheusa🇺🇸
@beastbuggy54

@sonuvabeast Killing BLACK FLAG AGAIN!!! 12 minutes to the top! He might be a little rusty! 😂😂😂

@sonuvabeast Killing BLACK FLAG AGAIN!!! 12 minutes to the top! He might be a little rusty! 😂😂😂

@sonuvabeast Killing BLACK FLAG AGAIN!!! 12 minutes to the top! He might be a little rusty! 😂😂😂

@sonuvabeast Killing BLACK FLAG AGAIN!!! 12 minutes to the top! He might be a little rusty! 😂😂😂

@sonuvabeast Killing BLACK FLAG AGAIN!!! 12 minutes to the top! He might be a little rusty! 😂😂😂

Texas was amazing!! Thank you to all @sonuvabeast sponsors this season! We are off to an amazing start! 1st place unlimitedin Texas East vs West vs Texas event feels great!@battlebornwheels @hulse_engineering @area.bfe @sasquatchmotorsportsusa @jmriggingsupply