Instagram Story Save

Today I was honored by the guys from @3dsets with a visit and they brought me their latest creation, specifically the 3d printed boat Triton, and as always I have to take my hat off to how incredibly detailed and precise the model is and how great it works 😍. Simply super perfect work 🦾 and again, as is their custom, it is possible to print such a huge ship on a @josefprusa Mini 🤯, which is incredible, so if you like the ship as much as I do, you can buy the print data for $59 at www.3dsets.com 🤑

#rc #boat #3DPrint #prusa #diy

Don't have a lake nearby? No problem. TRITON can handle it! 🚤

It’s been almost a week since its launch, and 3D printers worldwide are already buzzing. If you thought a 1-meter jet boat required a huge lake, think again. Thanks to the powerful, water-cooled Jet Pump system, a water surface of just 20 m² is all you need for adrenaline-fueled action!

Still on the fence?
Your printer is waiting.
Don't let it sit idle!

#triton #jetboat #3dsets #3dprintedboat #lake

TRITON & TRITON RACER: The Ultimate 1:8 Jet Boats! 🚤

The wait is over. Meet Triton, a high-performance beast nearly one meter long that prints easily on standard 18x18 cm printers!

Why it’s a game-changer:

🟠 Pure Jet Power: Water-cooled system ready for up-to 4S power. It's fast. Really fast.

🟠Scalability: Detailed cockpit perfectly sized for Dummy 13 (at 125%).

🟠 Slicer Ready: Optimized for PrusaSlicer, OrcaSlicer, Bambu Studio, and more.

Pick your style:

🏁 TRITON RACER – Our top-tier edition for those who want it all.

Exclusive Graphics: Multi-material "skin" system with iconic racing stripes and integrated logos.

Pro Details: Scale jet engine mock-up, grab rails, and aero wing.

The Full Set: Includes the rugged dual-axle scale trailer.

🚤 TRITON – The core powerhouse.

Clean, streamlined design focused on uncompromising speed.

The perfect choice for builders who prefer a minimalist, high-performance look.

Stop dreaming, start printing. Your harbor is waiting!

#triton #tritonracer #3dsets #newmodel #jetboat

The wait is almost over. Things are heating up! 🔥

We should probably apologize in advance for ruining your plans today.

Get your printers ready. You're printing today.

#3dsets #newmodel #comingsoon #youreprintingtonight #noplan

Teaser #3 is here. Did you pack your towel? 🧽🫧

Tomorrow is the FINAL teaser. Don't miss it!

#3dsets #comingsoon #newmodel #teaser3

The wheels are not what they seem🦉... and we love a good plot twist.
Teaser #3 drops tomorrow – and things are about to get even more interesting.

#3dsets #twinpeaks #newmodel #comingsoon teaser3

A new model is coming! ✨️
Can you guess what it’s going to be this time? Let us know your tips in the comments! 👇

Stay tuned for Teaser #2 tomorrow. You don’t want to miss this! 🕵‍♂️

#3dsets #newmodel #comingsoon #teaser1

/ EN below /
Srpnový víkend bude patřit všem fanouškům 3D Sets! 🏕
Naše digitální garáž vyráží do terénu a vy můžete být u toho. Na celý víkend se stěhujeme do Ohnišťan, kde spojujeme síly se spřátelenými RC modeláři. Ti v sobotu v areálu pořádají svou akci "2. pouťové setkání RC modelářů" a my jsme moc rádi, že u toho můžeme být s nimi.

📍 Kde: Areál fotbalového hřiště Ohnišťany
🗓 Kdy: 8. – 9. srpna 2026 (3D Sets MeetUp trvá oba dny, pouťová akce RC modelářů je pouze v sobotu).

Na co se můžete těšit?
🏁 Terénní okruh:
Bude připravená dráha, kde můžete pořádně provětrat své vlastní stroje a ukázat ostatním nejnovější upgrady. Podrobnosti o trati budeme postupně doplňovat, ale nudit se nebudete!

🚒 Půjčovna od SPTM
Kluci ze Spolku Příznivců 3D Tištěných Modelů budou mít na místě k zapůjčení Rescuery. Je to ideální šance pro každého, kdo si chce na vlastní kůži zkusit, jak se naše auta chovají v akci, než se pustí do vlastního tisku.

💡 Sdílení know-how:
Máte problém s tiskem pneumatik, ladíte převodovku nebo jen chcete pokecat o tom, jaký filament je nejlepší? Lepší místo pro radu od zkušenějších borců nenajdete. Budeme tam všichni na jedné vlně.

🕹 Modelářská výstava:
V rámci sobotního setkání RC modelářů uvidíte i „kováky“, bude spanilá jízda (kolem 12:30) a pro děti skákací hrad a hromada cukrové vaty.

🏕 Ubytování a logistika
Pro ty největší nadšence bude možnost postavit si stan v blízkosti dění – prostě tak trochu „na punk“.
Pokud ale dáváte přednost peřinám před spacákem, brzy doplníme tipy na ubytování v okolí Ohnišťan. 🛏

🌭 Občerstvení je v areálu zajištěno, takže hlady ani žízní trpět nebudete.

📌 Poznamenejte si datum do kalendáře!
Bude to náš první 3D Sets Víkend a my se už teď těšíme!
Sledujte FB událost, budeme tam postupně sypat další podrobnosti!

EN
Join us for the first full 3D Sets Weekend! It’s time to move from the screens to the trails. Join us for a full weekend of 3D Sets and RC fun!

Where: Ohnišťany, Czech Republic
When: August 8–9, 2026

Check out the FB event for more details. Link in bio.

Sobota v @rc_park_trsice byla prostě jízda a ráj pro každého hračičku! 🕹 Moc díky klukům za pozvání, a máme velkou radost, že naše modely v tomhle terénu obstály se ctí a dělaly parádu vedle všech těch „kováků“!

Saturday at RC Park Tršice was a true paradise for every RC enthusiast! Huge thanks for the invite.
We’re thrilled that our 3D printed models handled the tough terrain with ease and looked amazing alongside all the "metal" builds!
📸 Photo credit: FB Page RC Park Tršice

#3dsets#rcparktrsice #3dprinted #rccars

The journey to a functional Mogster rooftop tent was one hell of a ride. ⛺️

You might have caught our prototyping Reels, but if you want to see the whole story in one place—we’ve got good news.

The full development report is now live on our blog. All the photos, insights, and tiny details that didn't fit into the short videos are finally together.Link in bio! ☝️

#3DSets #Mogster #3DPrintedRC #ScaleBuilder #3dprototyping

The journey to a functional Mogster rooftop tent was one hell of a ride. ⛺️

You might have caught our prototyping Reels, but if you want to see the whole story in one place—we’ve got good news.

The full development report is now live on our blog. All the photos, insights, and tiny details that didn't fit into the short videos are finally together.Link in bio! ☝️

#3DSets #Mogster #3DPrintedRC #ScaleBuilder #3dprototyping

Part 3: The final chapter of our Mogster rooftop tent prototyping journey. ⛺️
This was the moment it all clicked. We stopped thinking only in 3D and started thinking like tailors. 🧵

Flat parts.
Controlled flexibility.
Material that knows exactly where to bend.
That was the breakthrough we needed to make it work.

Want to see the full story behind this evolution? The complete breakdown of our prototyping process drops on our blog this Monday evening!

#prototyping #mogster #rooftoptent #3dprinting #3DSets

Part 2: So, here’s how it went.
What you’re seeing is the version that actually worked.

Some ideas looked great, until we tried to print them. Some parts had to be completely rethought.

And more than once, we thought:
“this might not work at all.”

📌 The full story is coming soon. Part 3 is very soon.
#mogsteroverland #rooftoptent #3dprintingfail #3DPrinting