Zapisz historię na Instagramie

I was able to drive this transition clean one time off camera.Every time I was filming it laid on its side on the transition.Was surprised I was able to drive right out of it.Having front dig makes these cars so much fun.Now I need a new radio so I can actually use the rear dig.

@jesse_haines_fabrication
@tremrrwheels
@vision_rc

Finally got a chance to get some drive time on the JHf trail chassis replica at the property. It was a blast to drive.

This car was designed around the 5.5” 2.2 tires but in these videos I’m testing it out on some cut n shut Trepadors.They did pretty good but they look a little too small for this chassis IMO so I have switched back to 5.5” Mickey Thompson’s for now until I can get some of the LP Krawlers to try.

@jesse_haines_fabrication
@tremrrwheels
@vision_rc

Finally got a chance to get some drive time on the JHf trail chassis replica at the property. It was a blast to drive.

This car was designed around the 5.5” 2.2 tires but in these videos I’m testing it out on some cut n shut Trepadors.They did pretty good but they look a little too small for this chassis IMO so I have switched back to 5.5” Mickey Thompson’s for now until I can get some of the LP Krawlers to try.

@jesse_haines_fabrication
@tremrrwheels
@vision_rc

Clean SWEEP !!! @sonuvabeastcleaned house 🔥🔥🔥 won all 3 events @thegoodeveningranch the past 2 weeks !!! @crazy_cruiser_motorsportsKing of the ranch trailbreaker event. Cripple creek challenge and @werockliveunlimited class. Unbelievable driving. So proud of him.Sealed the national championship for the unlimited class four events in 4–0 undefeated!!! I don’t know if anyone has ever won the first four events in unlimited ever !!! Next up Indiana!! @sasquatchmotorsportsusa @hulse_engineering @area.bfe @ucfab @jmriggingsupply @battlebornwheels

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

I ordered some of the 7075 Treal H10 portal axles for the @sonuvabeast edition @hulse_engineering chassis and boy do they look good!
These axles will need to be ran with 100mm @priceyscustomcrawlers shocks with offset rod ends to maintain proper ride height.

@beastbuggy54
@richard_hulse

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Just finished TIG welding up the gen2 JHF moon buggy I started on last week.Up next is link/shock mounts and skid plates on the five we have welded up.Reach out to @jesse_haines_fabrication if you are interested in one of these.

#TIGWelding #JHFMoonBuggy #Rockcrawler

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Had an awesome 4 days at the property!I even went down to the lower section to drive the big rocks on “the wall” for a bit. (These rocks make the buggy look like an rc car)

I still haven’t tried driving out the top yet since it’s 40’-50’ high and I have only driven out there by myself.Hopefully soon I can get a couple rear steer buggies out there to help me break in some new lines.

#NotRC #TheProperty #Rockcrawling

@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

WOW !!!! What an amazing event!! Got to give a huge shout out to@crazy_cruiser_motorsportsfor putting on an awesome event! @sonuvabeast absolutely dominated from start to finish! It is amazing to sit back and watch him drive .Now he has 2 guaranteed spots in @trail.hero this year and 2 guaranteed spots in @texastopgunshootoutafter winning this @crazy_cruiser_motorsports event ! Maybe I can talk him into giving me one😂😂😂. Want to give a huge shout out too @hulse_engineering @area.bfe @battlebornwheels @ucfab @sasquatchmotorsportsusa @benthehanksfor all there support!! @sonuvabeast is on 🔥🔥🔥

Ready for some seat time in the buggy!!
🇺🇸
@jesse_haines_fabrication
@tremrrwheels
@mickeythompsontires

Just got the next Gen2 JHF moon buggy all tacked up in the fixture ready to start laying down some root passes.
I like to get as much of the chassis welded in the fixture as possible.I think this helps a bunch with holding everything in place through all the heat cycles.
Feels so good to be back to some full size chassis building after a long stretch of RC chassis work.

#JHFmoonbuggy #TIGwelding

@jesse_haines_fabrication

Got some new panels made for the moon buggy today. They were long overdue.

@jesse_haines_fabrication
@mickeythompsontires

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

Big THANK YOU to everyone who got on the list for the @sonuvabeast edition @hulse_engineering chassis.
Here are some pics with body panels on the car.
Can’t wait to start seeing these out in the rocks.

If you would like to get on the list there are a few more spots available on the website
Ultracustomfab.com

@beastbuggy54
@sonuvabeast
@richard_hulse
@priceyscustomcrawlers

1st place unlimited Cedaer City @werocklive !! @sonuvabeast is on🔥🔥🔥 huge thank you to @area.bfe @battlebornwheels @hulse_engineering @sasquatchmotorsportsusa @ucfab @benthehanks for all there support! Up Next West Virginia baby!!! @crazy_cruiser_motorsports crawl fest. And @werocklive @thegoodeveningranchIt is going to be an epic 2 weeks.

1st place unlimited Cedaer City @werocklive !! @sonuvabeast is on🔥🔥🔥 huge thank you to @area.bfe @battlebornwheels @hulse_engineering @sasquatchmotorsportsusa @ucfab @benthehanks for all there support! Up Next West Virginia baby!!! @crazy_cruiser_motorsports crawl fest. And @werocklive @thegoodeveningranchIt is going to be an epic 2 weeks.