Instagram Hikaye Kaydet

The 12 O’clock “SHERPA” mounts are our long awaited mounting solution to adapt a top mounted micro red dot sight to your existing SUMMIT mount. All it takes is a quick swap of the front two rings.

35mm variants will be the first to arrive and will be available in RMR, DPP and Acro footprint’s.

Release ETA is early February.

The 12 O’clock “SHERPA” mounts are our long awaited mounting solution to adapt a top mounted micro red dot sight to your existing SUMMIT mount. All it takes is a quick swap of the front two rings.

35mm variants will be the first to arrive and will be available in RMR, DPP and Acro footprint’s.

Release ETA is early February.

Smooth line work is about more than looks. We set out to design a scope mount that fit the scope tube as well as possible, given the assembly limitations.

The “tried and true” two-piece system has worked for decades, so why question it?

If you do some searching around and talk to some people that spend a lot of time setting up and using optics, you will find that the two-piece clamp has some well known drawbacks. Mainly, getting the reticle to stay level while torquing the fasteners. And once in a while, an inability for the elevation and or windage turret to be adjusted once the clamp is torqued to spec. But why?

The short answer for the sake of this long winded post, is that the distortion of the tube caused by the rings, translates to distortion in the scope components, geometry, and tolerances. All of which are critical for performance, accuracy, and repeatability.

DMR BUILD

Specs Below 👇

@noveske_llc 14.5” 6mm ARC
@leupoldoptics 3.6-18 Scope
@zero_gravityllc Mount
@stoic_solutions_ Streamline Barricade Bag
@stoic_solutions_ SE Rail Wrap
@onehundredconcepts Scope Cap Pro
@bonefrogammunition
@b5systems Stock & Grip
@ferroconcepts Sling
@surefire_llc RC2

Rare stage win at the North Springs @sparc_series match today. Super fun COF’s and arguably my favorite SPARC match so far. 6th overall. (@bangprecision took me under his wing)

@zevtech new gen 16” .223
@leupoldoptics Mark5HD 3.6-18 Tremor 3
@howitzerclothing fit

🎥: @alex_utahshooters 🫶🏼

Unfazed

@eberlestock Little Trick pack. Good for clandestine opportunities. Code SUBSECOND10

Unfazed

@eberlestock Little Trick pack. Good for clandestine opportunities. Code SUBSECOND10

Unfazed

@eberlestock Little Trick pack. Good for clandestine opportunities. Code SUBSECOND10

Unfazed

@eberlestock Little Trick pack. Good for clandestine opportunities. Code SUBSECOND10

Unfazed

@eberlestock Little Trick pack. Good for clandestine opportunities. Code SUBSECOND10

My TTG Rifle Setup - typically (always) consisting of @leupoldoptics Mark5HD glass, @zevtech rifles, and @geissele SSA-E X triggers. More in depth video coming soon.

My TTG Rifle Setup - typically (always) consisting of @leupoldoptics Mark5HD glass, @zevtech rifles, and @geissele SSA-E X triggers. More in depth video coming soon.

Could’ve used some range therapy on this Monday

📸 @gasgnnr @sunandshadow_llc @precisiongasgun

Leveled, torqued and zero’d

Will be checking out the new @colt.optics 1-8 over the next few weeks

I’ll be dedicating some time out to ~500 yards as well as running it on the 1x for CQB shooting.

If you’ve got any questions drop them below.

@zero_gravityllc summit mount 34mm 1.54 height
@fixitsticks_official
@magpod
@lmtdefense
@exigentdefense fireteam556
@b5systems sopmod @subrevtech bag rider

Leveled, torqued and zero’d

Will be checking out the new @colt.optics 1-8 over the next few weeks

I’ll be dedicating some time out to ~500 yards as well as running it on the 1x for CQB shooting.

If you’ve got any questions drop them below.

@zero_gravityllc summit mount 34mm 1.54 height
@fixitsticks_official
@magpod
@lmtdefense
@exigentdefense fireteam556
@b5systems sopmod @subrevtech bag rider

Leveled, torqued and zero’d

Will be checking out the new @colt.optics 1-8 over the next few weeks

I’ll be dedicating some time out to ~500 yards as well as running it on the 1x for CQB shooting.

If you’ve got any questions drop them below.

@zero_gravityllc summit mount 34mm 1.54 height
@fixitsticks_official
@magpod
@lmtdefense
@exigentdefense fireteam556
@b5systems sopmod @subrevtech bag rider

ChatGPT can’t beat this AI

Go far 🚀

Go far 🚀

Go far 🚀

Go far 🚀

Go far 🚀

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

@zero_gravityllc

Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play.

Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube.

Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming.

Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸

Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross

Welcome Zero Gravity to the Moto-Sphere 🌎

MX Tech & Talk

🌶️DISCOUNT CODES🌶️
10% off Luxon MX code (pinned IG&FB)
15% off RaceTech Titanium “mxtechtalk”
10% off Stuck NutZ “MXTT10”
10% off Shield Arms “MXTT”

———————————————————
#mxtt #supercross #sx #smx #motocross

INCREASE STABILITY

With the STREAMLINE BARRICADE BAG

Summer is here so that means Ranger Green is in season. 👊🤙