Instagram Story Save

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

TECH TIP! Do you have a Fusion kingpin axle and want to tighten up your kingpin preload? Here’s a step by step guide!

First, it’s worth knowing when you need to make an adjustment. It’s the same process as checking ball joints - jack the axle up enough to get a tire off the ground. Use a pry bar and a block of wood, if needed for leverage, to check for up & down or in & out play in the knuckle. The beauty of kingpin axles is that you can easily tighten up this play. You can also put a pry bar between the knuckle and inner C as well.

The obvious next question is how often do you need to check it. The answer is, it depends - how much you drive it and how hard you wheel it are all factors. This particular Jeep has about 5000 miles on the axles, some hard wheeling, and was due for some tightening. It’s always good to check it when performing regular maintenance.

Save this post for future reference and let us know if you have any questions!

#axle #axles #onetons #kingpin #techtalk #womenwhowheel #womenwhowrench #jeeplife #offroadlife #jeepjk #jeepjku #jeepjl #jeepjt #friendsdontletfriendsrunballjoints #jeepgladiator #rockcrawling #dailydriver #bigtires #beadlocks #40s #42s #43s

30 spline v.s. 40 spline. 🧐😮‍💨 @fusion4x4 #tacoma #4x4 #offroad #fusion4x4

42" @maxxistires stickies at 6psi with one finger🔥
@psc_performance_steering full hydro steering system on the @fusion4x4 dana 60.

#offroadaddictionokc #blackwidow #psc #fusion4x4

@offroadaddictionokc upgrading a Fusion Kingpin 60 with our double shear steering arms and their full hydro kit. Love us some full hydro!

The Fusion XL 60 is 🥩!

#jeep #wrangler #jeepwrangler #yeeyeejeeps #built2crawl

Someone call Wendy's and tell them we found the beef! High Clearance 40 Spline Kingpin XL 14 Bolts front and rear. Bolt-in ready with plug & play ABS.

#Fusion4x4 #AxleSwap #Jeep #JeepJK #JeepJL #JeepJT

Special delivery! That's more beef than a full cow.

#Fusion4x4 #AxleSwap #Jeep #JeepJK #JeepJL #JeepJT

You’re just one order away from opening a crate and seeing a Fusion Kingpin XL 40 spline locking hub staring back at you.

#Fusion4x4 #AxleSwap #Kingpin #OffRoad #RockCrawling Jeep JeepJK JeepJL JeepJT BuiltNotBought

OUR AXLES JUST GOT AN XL UPGRADE.

Years in the making, we’re proud to introduce the Fusion 40 Spline Kingpin XL Axle Sets.

The next generation of heavy-duty axles has arrived.

Want the details?

💥 40 spline strength where it matters most
💥 Kingpin design for durability and serviceability
💥 4” axle tubes — largest in the industry
💥 Castings designed for maximum ground clearance
💥 Engineered, tested, and manufactured in the USA

This isn’t a refresh.
It’s the next generation of Fusion axles.

AVAILABLE NOW
BUILT TO LAST

Link in bio

Check out the full blog and product pages to see what went into building something stronger from the ground up.

#Fusion4x4 #AxleSwap #Kingpin #OffRoad #RockCrawling Jeep JeepJK JeepJL JeepJT BuiltNotBought

@darkhelmet_jlu showing off the the Fusion lightweight Wilwood brake kit. 🔥🔥🔥

#jeepjl #jeepgladiator #jeepwrangler #1ton #kingpin

@bad_a55_cj7 with a bad a** Fusion Axle build. One of our favorite Gladiator colors as well.

#jeepjt #jeepgladiator #fusionaxles #kingpin #jeepwranglerunlimited

@newlinesaka Stretching out Fusion Pro Fabricated 10” Axles with double shear steering arms. Japan knows how it’s done!