Instagram Story Save

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Printing something that will hold or serve food? Here's what you actually need to know. 👉

A food contact approved filament is the right place to start, but it doesn't automatically make your final 3D print food-safe. The printing process itself introduces risks that the filament alone can't solve.

Swipe through to see why, and what you can do about it.

One noteworthy takeaway: Not all colored filaments are food contact approved either. Always check the datasheets before you print. With Extrudr filaments, we flag it clearly when a specific color is not approved, so you always know exactly what you're working with. ✅

What stuck out to you? Let us know in the comments below. 👇

#extrudr #3dprinttips #extrudraustria #extrudrfilament #3DPrinting

Game night just got an upgrade. 🏒✨

Ice Hockey World Championship season is on. Here are a few prints to make for you and your watch crew. 💯 Tag in the comments who you're watching with!

🧵 Filaments & 🔗 Print files:

The Beer Servant: PLA NX2 Matt | MW 1220697
Extremely Loud Bottle Opener: PLA NX2 MATT | MW 2565168
Coaster Flags of the World (Austria): PLA NX2 MATT | MW 381078

#extrudr #icehockey #gamenight #iihf #extrudrfilament #additivemanufacturing

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

☀️ Printing something for outdoors?

Outdoors, UV damage builds up over time. And on a hot summer day, surface temperatures can easily reach 60–70°C even in the garden.
⚠️ With the wrong filament, you risk fading, cracking and warping.

Here's which filament to reach for 👉

DuraPro ASA: built for direct sun, year-round. The permanent outdoor specialist.

FLEX Hard (TPU): UV-resistant and flexible. For parts that bend, seal or need to resist impact.

PETG: easy to print, water-resistant. Great for the garden, but avoid direct intense sun and high-heat spots!

Save this for your next outdoor print.
What are you printing for outdoors? 👇

#3Dprints #3DPrinting #extrudraustria #extrudr #extrudrfilament #3dprinttips

3 great Mother’s Day print ideas: pick your favorite. 🌸
...Or combine them all into one unforgettable gift. ✨

🧵 Filaments & 🔗 Print files:

🕯️ Decoration Set: PLA NX2 Matt | MW 2367309
💌 Mothers Day Card: BioFusion | MW 1205802
💐 MAMA Display: PLA Basic CMYK | MW 1332040

Would you print this for your mother this Mother’s Day? And which print is your favorite? Drop a comment below. 👇

#extrudr #3dprinting #extrudraustria #3dprints #mothersday

We didn’t know we needed this! 🤯🛏️

This bedside organizer is one of those prints that instantly upgrades your sleeping setup.

✅ No screws or tools needed
✅ Hooks directly onto the bed frame
✅ Keeps your phone, book, tissues & essentials within reach
✅ Perfect for small spaces & minimalist setups
✅ Lightweight, sturdy & super easy to print

Honestly… this might be the end of the “where did I put my phone?” era.

Would you print this bedside hook-on storage box organizer? 👇

🔗 Print File: MakerWorld 1051323
🧵 Filament: PLA NX2 MATT Military Green

#extrudr #3dprinting #extrudrfilament #extrudraustria #3dprints

You’ll want to 3D print this!

This time, we tried something different.3 days and 15 hours of nonstop printing

later, this watchful owl finally took shape. 🦉

Layer by layer, hour by hour, turning filament into something that actually feels alive. 👀

👉 Would you go this big on your next print?

📎 Print File: MakerWorld 2676879

🧵 Filament: PLA NX2 MATT Black, Military Beige, Brown, White

#extrudr #3dprinting #extrudrfilament #extrudraustria

From one to five.

FLEX Medium MATT is now available in 5 new colors 🔥, expanding beyond black to give your flexible parts more design freedom without compromising performance.

Same toughness, same flexibility, now with a matte look in red, navy blue, anthracite, white, and silver. 💪

Which color is your favorite to 3D print with? Share in the comments. 👇

#3Dprints #extrudr #extrudrfilament #extrudraustria #3DPrinting

From one to five.

FLEX Medium MATT is now available in 5 new colors 🔥, expanding beyond black to give your flexible parts more design freedom without compromising performance.

Same toughness, same flexibility, now with a matte look in red, navy blue, anthracite, white, and silver. 💪

Which color is your favorite to 3D print with? Share in the comments. 👇

#3Dprints #extrudr #extrudrfilament #extrudraustria #3DPrinting

From one to five.

FLEX Medium MATT is now available in 5 new colors 🔥, expanding beyond black to give your flexible parts more design freedom without compromising performance.

Same toughness, same flexibility, now with a matte look in red, navy blue, anthracite, white, and silver. 💪

Which color is your favorite to 3D print with? Share in the comments. 👇

#3Dprints #extrudr #extrudrfilament #extrudraustria #3DPrinting

From one to five.

FLEX Medium MATT is now available in 5 new colors 🔥, expanding beyond black to give your flexible parts more design freedom without compromising performance.

Same toughness, same flexibility, now with a matte look in red, navy blue, anthracite, white, and silver. 💪

Which color is your favorite to 3D print with? Share in the comments. 👇

#3Dprints #extrudr #extrudrfilament #extrudraustria #3DPrinting

It‘s the ultimate 3D print!

We didn’t just print a part… we printed a full-on, life-size action figure. 🤯

Multiple Bambu Lab printers running at the same time, parts coming together like a giant 3D puzzle, and suddenly it’s sitting right in front of you. 🧩

Would you print your own life-size figure? 👀

#extrudr #3dprinting #extrudrfilament #extrudr #extrudraustria

Why didn’t we have this sooner? 🚗

Spring’s here, longer days, spontaneous drives, maybe a quick stop for a barbecue along the way… might as well get the inside sorted too with this car headrest bag hook.

Printed in ASA to handle heat and UV without a problem ☀️

🔗 Print file: MakerWorld 2129191
🧵 Filament: DuraPro ASA Black

#extrudr #3dprinting #extrudrfilament #extrudraustria #3dprints

Stringing is one of the most common issues in 3D printing. 🧵

Those thin threads usually show up when filament keeps flowing while your printer moves.

The good news:
You don’t need to change everything.
A few small adjustments can already make a big difference. 🔧

👉 Start with the right settings for your material with our material profiles. It’ll save you time (and frustration). Link in bio!

How do you deal with stringing? Comment below!

#3Dprints #3dprinttips #extrudr #extrudrfilament #extrudraustria

Stringing is one of the most common issues in 3D printing. 🧵

Those thin threads usually show up when filament keeps flowing while your printer moves.

The good news:
You don’t need to change everything.
A few small adjustments can already make a big difference. 🔧

👉 Start with the right settings for your material with our material profiles. It’ll save you time (and frustration). Link in bio!

How do you deal with stringing? Comment below!

#3Dprints #3dprinttips #extrudr #extrudrfilament #extrudraustria

Stringing is one of the most common issues in 3D printing. 🧵

Those thin threads usually show up when filament keeps flowing while your printer moves.

The good news:
You don’t need to change everything.
A few small adjustments can already make a big difference. 🔧

👉 Start with the right settings for your material with our material profiles. It’ll save you time (and frustration). Link in bio!

How do you deal with stringing? Comment below!

#3Dprints #3dprinttips #extrudr #extrudrfilament #extrudraustria

Stringing is one of the most common issues in 3D printing. 🧵

Those thin threads usually show up when filament keeps flowing while your printer moves.

The good news:
You don’t need to change everything.
A few small adjustments can already make a big difference. 🔧

👉 Start with the right settings for your material with our material profiles. It’ll save you time (and frustration). Link in bio!

How do you deal with stringing? Comment below!

#3Dprints #3dprinttips #extrudr #extrudrfilament #extrudraustria

Stringing is one of the most common issues in 3D printing. 🧵

Those thin threads usually show up when filament keeps flowing while your printer moves.

The good news:
You don’t need to change everything.
A few small adjustments can already make a big difference. 🔧

👉 Start with the right settings for your material with our material profiles. It’ll save you time (and frustration). Link in bio!

How do you deal with stringing? Comment below!

#3Dprints #3dprinttips #extrudr #extrudrfilament #extrudraustria

Print once. Use it every day.

A simple print that keeps your belts organized, visible, and always within reach. 👖

No tools, no hassle. Just a clean solution for your closet.
It prints in a little over an hour and also has that nice twist!

👉 Try it yourself and make life easier.

🔗 Print file: Printables 1568907
🧵 Filament: PLA HS Pastel Blue

#extrudr #3dprinting #extrudrfilament #extrudraustria #3dprints

You’re drying bottles and glasses wrong. ❌

The ones you can’t put in the dishwasher like large bottles or wine glasses 🍷 usually end up on a mat, drying only from the outside.

👉 Inside? Moisture stays trapped.

Spring is the perfect time to rethink these small routines 🌱

With the right print like this one, air can circulate properly, so everything dries the way it should, inside and out. And the racks are stackable!

Sometimes it’s the little upgrades that make the biggest difference. ✨

Will you upgrade your kitchen with this print? 👇

🔗 Print File: MakerWorld 1403815

🧵 Filament: PLA NX2 MATT Military Dark Green

#extrudr #extrudrfilament #extrudraustria #3dprinting #3dprints