Instagram Story Save

The halo system from Division and KFX is our new motorized spinning system for lights, camera, or other elements. It combines with modular truss to fit your needs.

With the ability to handle a 15’ radius at a 3.5 second rotation, it can handle most creative situations. It can be mounted on the ground or in the air, with an optional platform column.

Wireless control and battery powered operation allow for use anywhere + optional motion control can make the complex simple.

Send us a DM if you’re interested!

#behindthescenes #camerarig #division

Our inventory of @buildmodulusx is perfect for VFX frames! These photos are taken from the set of Hacks S4, where they built 3x custom-sized frames. Super easy to adjust without compromising strength

Our inventory of @buildmodulusx is perfect for VFX frames! These photos are taken from the set of Hacks S4, where they built 3x custom-sized frames. Super easy to adjust without compromising strength

Our inventory of @buildmodulusx is perfect for VFX frames! These photos are taken from the set of Hacks S4, where they built 3x custom-sized frames. Super easy to adjust without compromising strength

Our inventory of @buildmodulusx is perfect for VFX frames! These photos are taken from the set of Hacks S4, where they built 3x custom-sized frames. Super easy to adjust without compromising strength

Our inventory of @buildmodulusx is perfect for VFX frames! These photos are taken from the set of Hacks S4, where they built 3x custom-sized frames. Super easy to adjust without compromising strength

Our 30x30 designed frame is lightweight, durable, and clean. Utilizing both Mx|66| and Mx|99|, this rig isn’t going anywhere.

Laminating truss and using our Kingpin Adapters gives this rig an outside width of 31’ and total length of 31’

No washer plates are needed, making this rig a breeze to build. Use Division’s 30x30 flyswatter frame on your next project!

Our 30x30 designed frame is lightweight, durable, and clean. Utilizing both Mx|66| and Mx|99|, this rig isn’t going anywhere.

Laminating truss and using our Kingpin Adapters gives this rig an outside width of 31’ and total length of 31’

No washer plates are needed, making this rig a breeze to build. Use Division’s 30x30 flyswatter frame on your next project!

Our 30x30 designed frame is lightweight, durable, and clean. Utilizing both Mx|66| and Mx|99|, this rig isn’t going anywhere.

Laminating truss and using our Kingpin Adapters gives this rig an outside width of 31’ and total length of 31’

No washer plates are needed, making this rig a breeze to build. Use Division’s 30x30 flyswatter frame on your next project!

Our 30x30 designed frame is lightweight, durable, and clean. Utilizing both Mx|66| and Mx|99|, this rig isn’t going anywhere.

Laminating truss and using our Kingpin Adapters gives this rig an outside width of 31’ and total length of 31’

No washer plates are needed, making this rig a breeze to build. Use Division’s 30x30 flyswatter frame on your next project!

Rotate, pan, and tilt your overhead and vfx telehandler frames with the KNUCKLE.

Remote controlled from the ground
Battery power or hydraulic power
Adapts to JLG telehandlers
Integrates seamlessly with modular truss

Give us a call and try it out!

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Back in November we had the privilege to provide the structural support for several art installations at @campfloggnaw

Thanks to @spkscenery for bringing us in and Rigging KG @connor_colby for leading the build. The final product turned out great!

We have a large inventory of @buildmodulusx & box truss ready to do your next build

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Ever have an impossibly large vehicle to rig? Well we know a thing or two about that. Check out this fire truck rig designed to get the camera directly over a cab that couldn’t be rigged to. Rig designed by @connor_colby

Goal posts getting the job done for DP @dillon_schneider and gaffer Jessie Jaracheski on this commercial.

A 20’ Mx|66| goalpost can support a 2400# center point load - more than enough for most applications.

Goal posts getting the job done for DP @dillon_schneider and gaffer Jessie Jaracheski on this commercial.

A 20’ Mx|66| goalpost can support a 2400# center point load - more than enough for most applications.

Goal posts getting the job done for DP @dillon_schneider and gaffer Jessie Jaracheski on this commercial.

A 20’ Mx|66| goalpost can support a 2400# center point load - more than enough for most applications.

A fresh take on a spinning rig that spun both camera and talent using Mx|66| and Mx|99| truss along with our 9x9 Rotator ModPart. Thanks @tyrogers.dp for putting it to good use!

This rig was a quick build, assembling in just 20 mins. It got down and dirty with camera counterbalance and camera attachment and the footage looks silky smooth 🤌🏼

Division Items Used:
- Mx|66| truss
- Mx|99| truss
- 9x9 Rotator ModPart
- Speedrail starters
- Speedrail truss flanges

The new Division site is live.
Truss. ModParts. Custom Rigs. Rentals. Shop.

Built for film, live event, and brand experiences. We help creative teams bring bold builds to life. Dive into load charts, search our inventory, and purchase ModParts.

division.rentals

Modulus-X Softboxes:

✅ Strong
✅ Easy to put together
✅ Any size
✅ Pipe integrates super easily

Give us a shout if you need one!

Modulus-X Softboxes:

✅ Strong
✅ Easy to put together
✅ Any size
✅ Pipe integrates super easily

Give us a shout if you need one!

Modulus-X Softboxes:

✅ Strong
✅ Easy to put together
✅ Any size
✅ Pipe integrates super easily

Give us a shout if you need one!

Modulus-X Softboxes:

✅ Strong
✅ Easy to put together
✅ Any size
✅ Pipe integrates super easily

Give us a shout if you need one!

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Our inventory of @buildmodulusx is great for building structures or raised platforms. The MX |99| has the best strength to weight ratio out of all standard trusses. And it combines seamlessly with MX |66|.

Here, we built a demo structure with @bctentertainment to demonstrate the ease of build & strength of our inventory.

Have questions? DM us or email contact@division.rentals and we’d be happy to help.

Special thanks to @morgangardiner_ for taking photo & video of the demo

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes

Throwing it back to this shoot with DP @veraeric where we got to rig up some fun ones.

One large rainbow rig and a smaller one with a low pivot. Always a good time breaking out the toys for setups like this!

#GripRigs #CameraRig #SetLife #GripLife #GripDept #GripSupport #keygrip #onset #behindthescenes