Instagram Story Save

Just a quick follow-up — our Polaris Steering Wheel Emulators are now available for pre-order!

Head over to Azwirepro.com to get your order in and lock yours down. While you’re there, make sure to check out the other options available on the product page, including custom layouts to better fit your setup.

Clean, low-profile, and built to keep your factory steering wheel controls with your aftermarket wheel upgrade.

#fyp #foryou #polarisrzr #rzrlife #rzrturbo utvbuild utvlife offroadparts aftermarketsteeringwheel steeringwheelcontrols azwirepro customutv

🚨 IT’S OFFICIAL — PREORDERS ARE LIVE! 🚨

Our Polaris RZR Steering Wheel Emulator is now available for preorder.

This system lets you upgrade to an aftermarket steering wheel while keeping the factory-style steering wheel controls in a clean, low-profile setup. Built around a flat black 6061 aluminum support plate and customizable mil-spec buttons, this emulator gives your interior a much more race-inspired feel without losing the functions you actually use.

Designed for @sparco_official , @mpi.innovations , @momomotorsport, @prpseats, and many more steering wheel options.

Factory function. Aftermarket wheel. Cleaner setup.

Watch the video and check it out in action 👀

Preorder now through AZWIREPRO.COM

#AZWirePro #PolarisRZR #RZRBuild #UTVParts #OffRoadWiring RaceCarWiring MotorsportsWiring SteeringWheelUpgrade SPARCO MPIWheel PRPSeats UTVLife OffRoadBuild RaceReady MadeInHouse

New product alert 🚨AZWIREPRO.COM

We’re excited to show off our Polaris RZR Steering Wheel Emulator — designed for @sparco_official , @mpi.innovations , and @prpseats steering wheel upgrades.

This setup gives you the same factory-style steering wheel control options you’re used to, with one major upgrade:

PTT — Push to Talk for your communications system.

Whether you’re running PCI, Rugged Radios, or another race comm setup, this gives you a clean, functional way to integrate push-to-talk control without overcomplicating your interior.

Clean install. Factory-style function. Race-ready communication.

Built for those who want their RZR setup to work as good as it looks.

#azwirepro #PolarisRZR #RZRBuild #SPARCO #MPIInnovations PRPSeats UTVParts RaceComms PushToTalk OffroadWiring SideBySide DesertRacing MotorsportsWiring

Crimping ain’t easy.

It’s all fun and games until one tiny terminal decides your whole day is canceled.

Strip wire.
Insert terminal.
Crimp.
Pull test.
Question life choices.
Repeat 69 times.

Harness life. 🔌😂

#WiringHarness #Crimping #MotorsportsWiring #RaceCarWiring #UTVWiring HarnessLife ShopHumor BuiltNotBought

@polarisrzr steering wheel emulators are in production!

We’re assembling the rear shells and getting them prepped for the front plates and electronics.

Pre-orders are live now — get yours at AZWIREPRO.COM before the first batch is gone.

#polarisrzr #rzrbuild #utvparts #motorsportswiring #azwirepro

Shop talk and update for wireless steering wheel modules.

Have questions? Drop a comment below 👇
#wireless #wirelesssteeringwheelcontrols #polaris #emulator

Mav R owners — what steering wheel controls do you actually want?

We’re looking at building a clean steering wheel emulator/control setup for the Can-Am Maverick R, and we want your input before we build it.

PTT, lights, horn, actuator, modes — what would you want on the wheel? Drop your ideas below.

Use these 5:

#CanAmMaverickR
#MavR
#UTVBuild
#SteeringWheelControls
#azwirepro

Wireless steering wheel product update video prior of release.

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

2026 Can-Am MVR finished up last week, and this one came out seriously clean.

This build got a full lighting, communication, control, and wiring package from front to rear. Up front, we wired in the @bajadesigns LP6s with backlighting, the @canamoffroad aftermarket hood scoop light, and Baja Designs A-pillar lighting that continues into the roof and rear setup.

Out back, this car is equipped with @5150whips , @pciraceradios communications, cargo lighting, and a full chase light system utilizing a few brands.

Underneath, we added custom RGB rock lights all the way around to give the car full underglow and trail visibility as well as the cool two features it offers, one being reverse (turns white) and one being brake (turns red) and cargo is also tied to the rock lights so when using cargo whole car turns white.

Inside, everything is powered and controlled through a @switch.pros.official RCR12. We also installed our AZ WirePro turn signal system, utilizing the aftermarket front signals and factory rear taillights through a clean rocker switch setup.

To finish it off, this build received a custom rear chase strobe controller from us, our coiled steering wheel harness replacement, and our push-to-talk interface that works with the factory steering wheel to complement the PCI communication system.

And if you look closely throughout the car… there’s also a little trick piece hiding in there that isn’t released just yet.

Clean wiring. Functional control. Built for the dirt.

#CanAm #CanAmMaverick #CanAmMVR #MaverickR AZWirePro UTVWiring RaceWiring OffroadWiring BajaDesigns SwitchPros PCIComms 5150Whips LITTIndustries UTVBuild OffroadBuild ChaseLights RockLights UTVLife DesertCar Motorsports

Quick wire up and install of this clean @evo_powersports can-am @mpi.innovations steering wheel, we added a quick disconnect for the customer so he can take the wheel out of the car as well as installed our PTT / Horn module that we have available on our website at Azwirepro.com so he could operate his @pciraceradios while out riding in his group, tuned his antenna and off he went.

If anyone needs your coms properly installed, or some just upgraded items in your rig feel free to hit us up!

Exciting Update for Our Wireless Steering Wheel Modules!

We’re thrilled to introduce a new feature that takes customization to the next level! Now, you can easily switch your buttons from **Momentary** to **Latching** AND choose which side you want your button layout on!

**How to Make the Switch:**
1. **Hold Down Both Buttons** for 5 seconds.
2. **Give a Single Dual Press** to swap your button layout!

Whether you’re on the go or at a standstill, our module adapts to your driving style. Upgrade your experience and enjoy the ultimate convenience at your fingertips!

🔗 [Azwirepro.com]

#WirelessSteering #Customization #CarTech #Innovation #DrivingExperience

@visionxlighting / @azwirepro edition street legal chase light.

We install these often on builds weather it’s a rzr/can-am/or expidition and even street vehicles. You@will see one installed in a chase truck soon for Chris for the class 5 car we finished for him.